Voltage Drop Calculator

Check voltage drop on low-voltage power runs to cameras and other devices.

Power supply

Enter the power supply or transformer that feeds these runs, and the drop each run may have.

A

Device configuration

4 devices in 1 group

One cable per device, copper at 20 °C

4 × 0.5 A · 18 AWG · 100 ft

A

0.64 V (5.3%) drop · 11.36 V at the device
Passes on 20 AWG or thicker · up to 187 ft on 18 AWG

Voltage drop

11.36 V

Voltage at the device

5.3% worst voltage drop (0.64 V)

12 V DC supply, 10% drop limit

  • Supply load

    24 W output

    2 A

  • Remaining

    before the reserve

    2 A

  • Supply rating

    20% reserve (1 A)

    5 A

Voltage at the device

11.36 V · 5.3% worst drop

Voltage drop summary

Clinton Tool Suite · Voltage drop

Voltage at the device Within limit

11.36 V

5.3% worst voltage drop (0.64 V)

Supply load
2 A of 4 A usable (within rating)
Remaining
2 A left
Output
24 W
Reserve
20% (1 A)

Device groups

GroupDevicesLoad eachWireRunDrop · at deviceSmallest wireLongest run
Device group 140.5 A18 AWG100 ft5.3% · 11.36 V20 AWG187 ft

Settings

Supply
12 V DC, 5 A rated
Drop limit
10%
Wire sizes
AWG, copper

Notes

  • Each device has its own run from the supply. The drop is the current times the resistance of both conductors, for copper at 20 °C; warm cable and copper-clad aluminium (CCA) drop more.
  • Within the drop limit doesn't confirm a device will run: check the voltage at the device against the minimum input voltage on its datasheet.
  • The smallest wire and longest run are the thinnest listed size and the longest length that keep the drop within the limit.
  • Within the rating less the reserve is OK; into the reserve is a caution; above the full rating is over.