PoE Budget Calculator

Check camera power draw against a switch or NVR PoE budget.

Power source

Enter the PoE switch, or NVR with PoE ports, that powers these devices.

W

Device configuration

4 devices in 1 group

4 × 6 W · 6.2 W each · 100 m assumed

W

Leave blank to assume 328 ft (100 m)

6.2 W from the budget, including 0.2 W estimated cable loss

PoE budget used

24.8 W

of 96 W available

120 W budget less a 20% reserve (24 W)

  • Remaining

    before the reserve

    71.2 W

  • PoE budget

    20% reserve (24 W)

    120 W

  • Ports

    PoE ports used

    4 of 8

Checks

  • Power budget

    Within budget

    24.8 W of 96 W available

  • PoE ports

    OK

    4 of 8 PoE ports used

  • Port standard

    OK

    Every group fits PoE+ ports

  • Cable length

    OK

    Every run within 328 ft

PoE budget used

24.8 W · of 96 W available

PoE budget summary

Clinton Tool Suite · PoE budget

PoE budget used All checks pass

24.8 W

of 96 W available

Remaining
71.2 W left
PoE budget
120 W
Reserve
20% (24 W)
Ports
4 of 8 PoE ports used

Checks

Power budget
Within budget · 24.8 W of 96 W available
PoE ports
OK · 4 of 8 PoE ports used
Port standard
OK · Every group fits PoE+ ports
Cable length
OK · Every run within 328 ft

Device groups

GroupDevicesPowerCablePer deviceTotal
Device group 146 W max100 m assumed6.2 W24.8 W

Settings

Port standard
PoE+ (802.3at, 30 W)
PoE ports
8

Notes

  • Each device takes its allocation from the budget: the full switch-side power of its PoE class, or its datasheet maximum plus an estimated cable loss.
  • Within the budget less the reserve is OK; into the reserve is a caution; above the full budget is over budget.
  • Cable loss is an estimate (the port standard's minimum voltage, 12.5 Ω per 100 m of Cat5e). A switch that reserves power by PoE class may set aside more than the devices draw.